General Electric Push-buttons Series P9 - 22mm
![]() ![]() |
Applications. The new LED can be used with all the current pilot lights, as well as with the illuminated controls units.
Specifications
|
Push-buttons Series 077 - 30mm
![]() ![]() ![]() |
The units of Series 077 are designed for fitting onto panels with a thickness between 1 and 7 mm, with holes of 30.5 mm. diameter, according to rules established by EN 60947.5.1. A special metal ring supplied with each unit or one of the name plates included among the fittings, enables the unit to be exactly positioned. All equipment is supplied with a set of spacing rings to adjust variations in the thickness of the panel thus ensuring a uniform front protrusion. Features and benefits
|
General Electric PB-line series push-buttons (discounted)
![]() |
Series PB-line push-button line from GE is the most cost effective solution in control and signalling devices available. Concentrating on the highest usage product types, cost effectiveness is achieved through a simplified one piece fit and connect design delivering additional cost savings in ordering, packaging, installation and wiring. Modern in design and appearance incorporating new LED indicating lamp technology, the range is styled to enhance the control station of any machine or operator interface. |
NLT Light towers
![]() |
|
General Electric 101 series palm push-buttons
![]() |
101 Series is a line of palm push-buttons for intensive use and control of AC/DC electrical circuits. |
General Electric IP series Foot switches
![]() |
Foot switches , for intensive services suitable for controlling and monitoring of low voltage AC and DC electrical circuits. |
General Electric 105 series Signalling devices
![]() |
Series 105 signalling units are used to indicate the electric equipment power supply conditions. For this purpose the devices shall be wired after the main disconnecting switch and clearly in view when the cabinet?s doors are opened. Series 105 DTL devices can be used on three-phase lines with or without the neutral wire or single-phase power lines, indicating the hazardous condition due to the applied voltage. Three luminous red lamps are used. The flashing devices are normally used in combination with limit switches contacts NC type 114FCT03 that provides insertion when the cabinet door are open only. |
Metal and thermoplastic limit switches IS, IM, IUG, IZ series General Electric
![]() |
|