Float switches are used in the automation of electrical equipment, such as: pumps, solenoid valves, alarms, motorised sluice gates, etc. All versions feature an internal changeover contact operated in accordance with the level of liquid where the float is located. The cables used are high-quality and offer excellent mechanical and chemical resistance over time.

• Activation angle -45∞...+45∞
• 130g external counterweight included
• Float casing material: polypropylene
• Cable A05 VV-F3X1 (PVC) available in lengths of 3, 5, 10 and 15m and cable H07 RN-F3X1 (Neoprene) available in lengths of 5, 10, 15 and 20m
• Rated cable diameter: 9mm (PVC and Neoprene)
• Relay with changeover contact 10(8)A 250VAC 50/60Hz
• Maximum installation depth: 30m
• Maximum pressure: 3bar
• Operating temperature: 0Е+50∞C
• Storage temperature: -20Е+70∞C
• IEC degree of protection: IP68
• Insulation class: II

Datasheet

The float switches comprises of a one-piece external blow-moulded polypropylene casing, with fixed internal counterweight located in the cable exit area. The regulator contact is positioned centrally in its own watertight chamber. This is insulated from the external casing by injecting closed-cell foam. This solution further increases protection against moisture leakage and heat insulates the watertight chamber housing the contact, eliminating the creation of condensation.

• Activation angle -15∞...+15∞
• Internal counterweight
• Float casing material: polypropylene
• Cable H07 RN-F3X1 (Neoprene) available in lengths of 5, 10, 15 and 20m
• Rated cable diameter: 9mm
• Relay with changeover contact 10(4)A 250VAC 50/60Hz
• Maximum installation depth: 50m
• Maximum pressure: 5bar
• Operating temperature: 0Е+50∞C
• Storage temperature: -20Е+70∞C
• IEC degree of protection: IP68
• Insulation class: II

Datasheet