Spelsberg AKi STV Аксессуары

Основные характеристики

Spelsberg

  • ____

  • ____

  • ____

  • ____

  • ____

  • ____

  • ____

  • ____

Перечень продукции

Артикул

Наименование

Габариты

Стенки

Описание

22746301

KVR M63-MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

22744001

KVR M40-MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

22743201

KVR M32-MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

22745001

KVR M50-MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

22742101

KVR M20-GDB/MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

22742001

KVR M20-MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

22741601

KVR M16-MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

22742501

KVR M25-MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

26043201

DMS M32

---

----

Double membrane seals made of elastic plastic with two sealing membranes, closed

26042501

DMS M25

---

----

Double membrane seals made of elastic plastic with two sealing membranes, closed

26042001

DMS M20

---

----

Double membrane seals made of elastic plastic with two sealing membranes, closed

22741201

KVR M12-MGM

---

----

Cable gland with strain relief, polyamide, M_ x 1.5 mm, with lock nut

79300401

AK ABL-ES

---

Set = 4 pcs.

External fixing lugs, for mounting separate enclosures or small units on flat wall surfaces, can be fixed to the box base at an angle of 0°, 45°, or 90°, wall gap 7 mm, material stainless steel, suitable for all AK enclosures from 300 mm front,

7080001

ZPR

---

----

Z-wall profile, length 2 m, with 8 M6 cylinder screws and 8 captive push nuts, wall clearance 70 mm, material: galvanised steel

26041601

DMS M16

---

----

Double membrane seals made of elastic plastic with two sealing membranes, closed

26044001

DMS M40

---

----

Double membrane seals made of elastic plastic with two sealing membranes, closed

26242001

BST M20

---

----

With ventilation seal to avoid condensation formation in enclosures, flow rate 100 l/min. at 0.1 bar overpressure, thermoplastic elastomer, grey, recommended for insertion on the left and right enclosure sides in different heights (see Technical Appendix - protection against condensate water)

79240001

AK KBL

300 x 125 x 90 мм

----

for installation in the components of the AK enclosure system (until 04/15) for 300 mm wide end walls, with cable covers as standard

79310001

AKi WSD

300 x 580 x 270 мм

----

Stainless steel, for external housing applications from AKi series up to 300 x 450 mm

79910301

AK BC

---

----

On-board case, for closing off unused circuit breaker positions, width 54 mm for 3 distribution units, for 35 mm standard rail, e.g. to house fuses, operating instructions, etc.

70690201

AK SGA-2

---

Different closures, max. 10 different closures possible

Lock fittings, for installation in hinged doors of distribution boxes AK 03 to AK/AKi 70 and AK/AKi Plus 14 to 56, with 2 keys and installation instructions

70610201

AK SGA-1

---

Identical locks

Lock fittings, for installation in hinged doors of distribution boxes AK 03 to AK/AKi 70 and AK/AKi Plus 14 to 56, with 2 keys and installation instructions

79100101

AK KS-IP65

---

----

Combi set, for horizontal or vertical combination of all AK enclosures (until 04/15) and AKi enclosures from 300 x 150 mm, complete with wedge connectors and intermediate sealing for 150 and 300 mm enclosure sides, each 300 mm = 1 combi set

59110001

AK KS-IP30

---

----

Combi set without intermediate enclosure seal, for horizontal or vertical combination of all AK enclosures (until 04/15) and AKi enclosures from 300 x 150 mm, 1 set = 10 wedge connectors