Spelsberg IBT Аксессуары

Основные характеристики

Spelsberg

  • ____

  • ____

  • ____

  • ____

  • ____

  • ____

  • ____

  • ____

Перечень продукции

Артикул

Наименование

Габариты

Стенки

Описание

84000401

Abox 025/040 KLS-2,5?/4?

---

5x2.5/4 mm?, for K0-, K15, K1-, K2-EK boxes

Connecting terminal acc. to DIN EN 60998 (VDE 0613), Ui=690V, Connecting terminal, Ui=400V / 690V, Terminal blocks, for installation in IBT mounting boxes

46053501

WK 250 KLS-25?

---

5x25 mm?, for K4-EK boxes

Connecting terminal, Ui=400V / 690V, Terminal blocks, for installation in IBT mounting boxes

46051001

WK 100 KLS-10?

---

5x10 mm?, for K15, K3-, K4-EK boxes

Connecting terminal, Ui=400V / 690V, Terminal blocks, for installation in IBT mounting boxes

46050601

WK 060 KLS-6?

---

5x6 mm?, for K15, K2-, K3-EK boxes

Connecting terminal, Ui=400V / 690V, Terminal blocks, for installation in IBT mounting boxes

46051601

WK 160 KLS-16?

---

5x16 mm?, for K3-, K4-EK boxes

Connecting terminal, Ui=400V / 690V, Terminal blocks, for installation in IBT mounting boxes

97920501

IBT ST

---

protects the holes for the equipment screws from ingress of concrete

IBT plug

97911001

GWB

15 мм

to take a ceiling hook, converts every U71 junction box to a ceiling socket

Threaded base M5

97174801

U 71 KP-M5

43 мм

(suitable for series U 71)

Dome with threaded bush M5, suitable as an attachment for U 71 boxes as well as magnet and adhesive blank bases

97921501

VB 105

---

for a spacing 105 mm

Interconnection frames for the combination of boxes under extreme loading

97921401

VB 90

---

for a spacing 90 mm

Interconnection frames for the combination of boxes under extreme loading

97921301

VB 80/85

---

for a spacing 80 and 85 mm

Interconnection frames for the combination of boxes under extreme loading

97921201

VB 71

---

for a spacing 71 mm

Interconnection frames for the combination of boxes under extreme loading

97921001

VBN

---

(for U 71 receptacle 971 045 02)

Compound nipple as a seal and cable routing duct for a spacing of 71 mm

98010401

K4 VD

202 x 311 мм

----

Sealing cap, white, flame retardant, for special boxes

98010001

K3 VD

142 x 142 мм

----

Sealing cap, white, flame retardant, for special boxes

97510201

K2 VD

90 x 146 мм

----

Sealing cap, white, flame retardant, for special boxes

97510001

K1 VD

90 x 90 мм

----

Sealing cap, white, flame retardant, for special boxes

97710501

K15 VD

110 x 115 мм

----

Sealing cap, white, flame retardant, for special boxes

97710001

K0 VD

70 x 100 мм

----

Sealing cap, white, flame retardant, for special boxes

97910301

U 86 VDF

---

with fixing screws

Sealing cap for junction boxes, flame resistant, white

97910201

U 71 VDF

---

with fixing screws

Sealing cap for junction boxes, flame resistant, white

97910401

U 71 VDS

---

----

Sealing cap for junction boxes, flame resistant, white

97910001

VD 75

---

with fixing screws

Sealing cap for junction boxes, flame resistant, white

92510001

HW VD-67

---

for type HW 070, screw spacing 67 mm

Sealing cap for junction boxes, flame resistant, white, polystyrene

92510101

HW VD-60

---

for type HW 035 / HW 050 / HW 065, screw spacing 60 mm

Sealing cap for junction boxes, flame resistant, white, polystyrene

97410201

BS 2 VD

86 x 146 мм

for equipment installation box BS 2, 146 x 86 mm

Sealing cap BS, white, flame-retardant, with fixing screws and assembly bridges

97410001

BS 1 VD

86 x 86 мм

for equipment installation box BS 1, 86 x 86 mm

Sealing cap BS, white, flame-retardant, with fixing screws and assembly bridges

97911601

DH 90

---

----

Ceiling hook, insulated, with wood screw thread

97911801

DH 65

---

----

Ceiling hook, insulated, with wood screw thread

97911501

DH 55

---

----

Ceiling hook, insulated, with wood screw thread

97912301

DH 135-M5

---

135 mm

Ceiling hook, insulated, with M5 thread, Metal ceiling hook, insulated with M5 thread for ceiling sockets

97912101

DH 115-M5

---

115 mm

Ceiling hook, insulated, with M5 thread, Metal ceiling hook, insulated with M5 thread for ceiling sockets

97911901

DH 100-M5

---

100 mm

Ceiling hook, insulated, with M5 thread, Metal ceiling hook, insulated with M5 thread for ceiling sockets

97911701

DH 75-M5

---

75 mm

Ceiling hook, insulated, with M5 thread, Metal ceiling hook, insulated with M5 thread for ceiling sockets

97912201

DH 90-M5

---

90 mm Lange

Ceiling hook, insulated, with M5 thread

97912001

DH 65-M5

---

65 mm

Ceiling hook, insulated, with M5 thread

97953901

U 71 BSK

71 x 71 x 21 мм

height 21 mm for magnet fixing, Magnet hole has to be plastered later

blank base, base for supporting IBT boxes and boxes in opposing formwork in conjunction with support spars, can be combined via snap-in connection, if fitting the blank base using nails, magnet, adhesive, the fixing points must be plastered subsequently., For fitting: 1. The U 71 boxes in opposing formwork, at a 71 mm spacing. Can also be combined with interconnecting frame for extreme loading. 2. The mounting boxes K3 EK and K4 EK with opposing shuttering with 2 or 4 sockets and 3 support spars each in the corners

97953801

U 71 BSK-K

71 x 71 x 21 мм

height 21 mm for adhesive fixing

blank base, base for supporting IBT boxes and boxes in opposing formwork in conjunction with support spars, can be combined via snap-in connection, if fitting the blank base using nails, magnet, adhesive, the fixing points must be plastered subsequently., For fitting: 1. The U 71 boxes in opposing formwork, at a 71 mm spacing. Can also be combined with interconnecting frame for extreme loading. 2. The mounting boxes K3 EK and K4 EK with opposing shuttering with 2 or 4 sockets and 3 support spars each in the corners

97953002

U 71 BSK-2

71 x 71 x 25 мм

height 25 mm for face concrete, minimum visibility on the feet

blank base, base for supporting IBT boxes and boxes in opposing formwork in conjunction with support spars, can be combined via snap-in connection, if fitting the blank base using nails, magnet, adhesive, the fixing points must be plastered subsequently., For fitting: 1. The U 71 boxes in opposing formwork, at a 71 mm spacing. Can also be combined with interconnecting frame for extreme loading. 2. The mounting boxes K3 EK and K4 EK with opposing shuttering with 2 or 4 sockets and 3 support spars each in the corners

97953001

U 71 BSK-NA

71 x 71 x 25 мм

height 25 mm for nail fixing

blank base, base for supporting IBT boxes and boxes in opposing formwork in conjunction with support spars, can be combined via snap-in connection, if fitting the blank base using nails, magnet, adhesive, the fixing points must be plastered subsequently., For fitting: 1. The U 71 boxes in opposing formwork, at a 71 mm spacing. Can also be combined with interconnecting frame for extreme loading. 2. The mounting boxes K3 EK and K4 EK with opposing shuttering with 2 or 4 sockets and 3 support spars each in the corners

97953201

K0 K15 BL

21 x 110 x 15 мм

2 blank cleats per box required

Blank cleat for mounting the mounting box K0 EK and the mounting box K15 EK for opposing formwork, 2 pieces are required for each box, Recommended accessories:

97953101

K1 K2 BL

21 x 90 x 15 мм

----

Blank cleat for fixing: 1. The special boxes K1 EK and K2 EK boxes for opposing formwork, 2. The cone funnel for transfer from risers, 2 pieces are required for each insert

97443101

BS 1-BSK

86 x 86 x 25 мм

86 x 86 x 25 mm, blank base

Blank base BS to support the BS boxes, for opposing formwork in conjunction with support spars

97443201

BS 2-BSK

86 x 146 x 25 мм

146 x 86 x 25 mm

Blank base BS to support the BS boxes, for opposing formwork in conjunction with support spars

97050501

BSK 2

---

for conduit ferrules 970 523 01 / 970 530 01

Blank base to support the conduit elbows including conduit ferrules, for opposing formwork in conjunction with support spars

97050001

BSK 1

---

for conduit ferrules 970 518 01

Blank base to support the conduit elbows including conduit ferrules, for opposing formwork in conjunction with support spars

97953501

STH-STU

---

----

Support buffer as an attachment for support spars when using magnetic clamps or adhesive in vertical formwork (instead of the blank base)

97973001

STH 230

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97974001

STH 240

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97979001

STH 290

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97969001

STH 190

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97967001

STH 170

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97965001

STH 150

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads

97964001

STH 140

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads

97963001

STH 130

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads

97961001

STH 110

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads

97957001

STH 70

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads

97959001

STH 90

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads

97960001

STH 100

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads

97953601

STH-ELP

---

----

Cartridge insert, 6 mm O, when support spar tolerance compensation is required, (in combination with STH-STU support buffer)

97924201

NA-AL

40 мм

aluminium nail, 40 mm, long-ridged

Fixings for wood / plastic formwork, for site cast concrete or poured concrete construction on wooden formwork, use 2 nails for extreme loading

97924301

NA-AL/gl

40 мм

aluminium nail, 40 mm, smooth

Fixings for wood / plastic formwork, for site cast concrete or poured concrete construction on wooden formwork, use 2 nails for extreme loading

97924801

KR

---

adhesive black, as a non-damaging fixing, when using blank and flange, (usable several times), with vertical formwork, also use support spars

Fixings for plastic/steel formwork

97924501

HC

---

support clip for mesh thickness as an auxiliary fixing for the boxes onto (2 to 3 clips per box), only usable with support spars

Fixings for plastic/steel formwork

97925001

HFL

---

support flange 50 mm O, plastic

Fixings for plastic/steel formwork

97929901

HM-UNI

---

magnetic clamps, 50 mm O, extra strong, pull-off strength 300 +/- 20 N=30 kp

Fixings for steel formwork

97924001

NAS-AL

40 мм

Spreader nail, aluminium 40 mm, with plastic plug for fixing the boxes on the steel formwork (drilled hole 5.5 mm), has proven excellent for tunnel formwork

Fixings for steel formwork

97928001

HM

---

magnetic clamps, 50 mm O, normal, pull-off strength 120 +/- 20 N

Fixings for steel formwork

97926001

ANSW

---

weld on screw M6 x 10 mm, Inexpensive, secure fixing of the box, onto steel formwork without drilling

Fixings for steel formwork

97930001

MA

---

magnetic lifter for dismounting the magnetic clamps HM and HM-UNI, in two parts

Fixings for steel formwork

97923001

ROS

---

conduit support, grey, height 21 cm

Fixings for conduits and cables

97913501

ABH 1

40 x 40 x 33 мм

spacer, 40 x 40 x 33 mm

Fixings for conduits and cables

97913601

KBI 1

---

clip 4.6 x 180 mm

Fixings for conduits and cables

97024001

RVB 40

---

for long-ridged pipes M40

Conduit coupling (without conduit) with strain relief, grey, for flexible metric electrical installation conduits

97023201

RVB 32

---

for long-ridged pipes M32

Conduit coupling (without conduit) with strain relief, grey, for flexible metric electrical installation conduits

97022501

RVB 25

---

for long-ridged pipes M25

Conduit coupling (without conduit) with strain relief, grey, for flexible metric electrical installation conduits

97022001

RVB 20

---

for long-ridged pipes M20

Conduit coupling (without conduit) with strain relief, grey, for flexible metric electrical installation conduits

97811801

IBT LZA-18

---

with 18 mm punch set for pipe M20

Hand hole punch, punching tool for making precision fit entries in concrete boxes, perforation always 1 - 3 mm smaller than the conduit / conductor diameter

97812301

IBT LZA-23

---

with 23 mm punch set for pipe M25

Hand hole punch, punching tool for making precision fit entries in concrete boxes, perforation always 1 - 3 mm smaller than the conduit / conductor diameter

97810001

IBT LZA-OE

---

without punch set

Hand hole punch, punching tool for making precision fit entries in concrete boxes, perforation always 1 - 3 mm smaller than the conduit / conductor diameter

97915501

WED

---

expansion range 9 - 25 mm O

Expansion mandrel, assembly tool when inserting conduit

97892301

IBT STE-LZA/23

---

----

Punch sets as replacements or where expansion is required for IBT LZA hand hole punch

97891801

IBT STE-LZA/18

---

----

Punch sets as replacements or where expansion is required for IBT LZA hand hole punch

97891401

IBT STE-LZA/14

---

----

Punch sets as replacements or where expansion is required for IBT LZA hand hole punch

97916201

LST

---

with 18 mm and 23 mm punch sets, as well as expansion mandrel

Hole punch for large scale operation in component factories, with fixing devices

97883901

IBT STE-LST/39

---

----

Punch sets for LST hole punch

97883001

IBT STE-LST/30

---

----

Punch sets for LST hole punch

97882301

IBT STE-LST/23

---

----

Punch sets for LST hole punch

97881401

IBT STE-LST/14

---

----

Punch sets for LST hole punch

97881801

IBT STE-LST/18

---

----

Punch sets for LST hole punch

97412001

BS MBR

---

2 pcs. required per box

Assembly bridge for the installation of British standard equipment in boxes BS 1 and BS 2, can be clicked into place and moved sideways

97413501

BS ES-40

---

3.5 x 40 mm

Installation screws for fixing BS equipment

97415001

BS ES-50

---

3.5 x 50 mm

Installation screws for fixing BS equipment

97413001

BS ES-30

---

3.5 x 30 mm

Installation screws for fixing BS equipment

92512101

HW LFR-120

---

HW hole cutter HW LFR-120, Will fit any commercial drill chuck, diameter 120 mm O, cutting depth 40 mm

Hole cutter, 120 mm O, suitable for wood and gypsum concrete plates, Recommended accessories: IBTronic XL Drillbox, Recommended accessories:, Hole cutter with spring for ejection of PCB, drilling depth up to 30 mm

97910701

ES-25

---

3.1 x 25 mm

Additional device screws for mounting built-in devices in cavity wall outlet sockets

97910601

ES-18

---

3.1 x 18 mm

Additional device screws for mounting built-in devices in cavity wall outlet sockets

97910501

ES-10

---

3.1 x 10 mm

Additional device screws for mounting built-in devices in cavity wall outlet sockets